|
Planers produce more chips and dust than most other
tools. One of the fundamental design principles for
Festool power tools is consideration for highly
effective dust extraction. Effective dust collection
saves you time normally spent for clean up and time is
money.
Smooth cuts are just part of the story with Festool
planers. When planing carcasses, trim, panels, or doors,
the one-handed EHL 65 is both ergonomic, as well as
powerful. With depth control that can be adjusted
on-the-fly, spiral cutterhead, and 720 watts (6.0 Amps)
the EHL 65 planer fits the bill for most planing
applications. The base of the EHL 65 planer featured an
angled groove for chamfering operations with the size of
the chamfer being controlled by the depth of cut which
can be controlled in 1/256" increments.
So many trimming and planing tasks require working in
awkward and sometimes difficult to reach areas. Being
able to control the planer with one hand allows easy
access for challenging cuts, while leaving one hand free
to help secure the material. Not only does the EHL 65
planer allow for one handed use, it also produces clean
and smooth shear cuts. The spiral single-knife
cutterhead cuts quickly, quietly, and cleanly for less
re-work and great results. Conveniently arrange the dust
collection port on either side of the machine for
optimum extraction. It is a simple and straightforward
machine that performs like no other.
Click here for manual
__________________________________________________________________________________________
|
|
A unque planer, very quiet and very fast. Change cutting
depth with the planer running. Always a clear view of
the rebate edge. Create distressed or rough-hewn effects
with accessory heads, or convert into a bench-mounted
planer with optional bench unit.
- Planer head is mounted on one side for unlimited
rebate depth and planing up to the edge
- Single spiral carbide blade requires no adjustment of
cutting circle diameter and planer head
- The fastest blade change - takes only 60 seconds
- Long plate at front and rear
- Lockable planing depth adjuster
- V-groove in shoe for corner beveling
- Pivoted chip deflector and dust extraction port mounts
on left or right side
- Electronics with 3 control and monitoring functions:
controlled smooth start-up, constant speed under load,
and temperature-triggered overload protection
Click here for manual
__________________________________________________________________________________________
|
