4 1/2" rotary sander RAS 115.04 E
Item # 570738 
 

If you strip coatings and prep surfaces regularly, this is the tool for you. The speed range and torque are ideal for the task, and the extremely efficient dust extraction helps keep the air and the area clean. A swiveling hood enhances dust extraction, while giving you a clear view of the workpiece.

- Optimized for stripping coatings and prepping surfaces
- High torque, moderate speed
- Optimum dust extraction through rear dust extraction port
- Swivelling dust extraction hood for unobstructed view of workpiece
- Electronic speed control for constant speed under load
- VS balancing for smooth running
- StickFix (H&L) system for fast abrasives changing

Click here for manual

Gear-driven detail sander Deltex DX 93 E
Item # 567738 
 

A handy sander for difficult and hard to reach spots. the Deltex provides perfect sanding results in even the tightest of corners. The Deltex triangular sanding pad means you can power sand using the full area of the pad right into the tightest corner, saving labor and eliminating time-consuming manual sanding in problem areas. Deltex is the ideal tool for sanding edges, surfaces, and corners in a single operation; for example, wooden staircases, parquet floors, etc. With a housing diameter of only 2 1/4" in the grip area, the Deltex rests comfortably in your hand for fatigue-free work.

- Full-area sanding into every corner through orbital sanding motion
- Sanding stroke of 2.5 mm guarantees above average material removal
- Integrated dust extractor port
- Stepless electronic speed control for various uses
- StickFix (H&L) sanding system for fast replacement of sanding pad and abrasives

Click here for manual

 Delta orbital sander DTS 400 EQ
Item # 567825 
 

- Small, light, and handy, ideal for work on vertical surfaces
- Effective on surfaces and in corners
- Encapsulated bearing for long service life
- The specialist for hard to reach points such as beads and corners
- Smooth running through VS balancing, easy on joints
- Edge protection prevents damage to workpiece
- Stepless electronic control for many applications
- Replaceable filter bags
- Dust extraction port
- Plug it detachable power cord

Note: Pads not interchangeable with RS 400 EQ

Click here for manual

Orbital sander RTS 400 EQ
Item # 567817 
 

- Small, light, eccentric sander ideal for work on vertical surfaces
- Rectangular sanding pad
- High power on surfaces, in rebates, and on edges
- Encapsulated bearing for long service life
- Sand close to edges for efficient working
- Smooth running through VS balancing, easy on wrists
- Edge protection prevents damage to workpiece
- Stepless electronic speed control for many applications
- Replaceable filter bags
- Dust extraction port
- Plug it detachable power cord

Note: Pads not interchangeable with DS 400 EQ

Click here for manual

Orbital sander RS 2 E, half sheet
Item # 567669 
 

The RS 2 E is an economical sander for large areas. Precision fine sanding on large surfaces with the RS 2 E gives high surface quality. Typical applications include intermediate sanding of varnished doors. An ergonomic extra handgrip permits easy guidance with little force to avoid premature fatigue during long sessions.

- Powerful, efficient through fast material removal
- Extra hand grip for excellent tool guidance and even application
- Large MPE sanding pad, hard wearing for long service life
- StickFix (H&L) system for fast abrasives changes
- Very smooth running through VS balancing, easy on joints
- Sand right up to the edge on 3 sides for full area sanding with no finishing work
- Stepless electronic speed control for many applications

Click here for manual

Linear sander Duplex LS 130 EQ
Item # 567777 
 

Surface finishing can be the most tedious part of a job, but also one of the most important. Power tools speed the task on flat surfaces, but up until now tongue and groove joints, rebates, and profiles have often left even the best-equipped craftsman with no alternative but a sanding block and elbow grease - and hours of tiring work. Not any more! Festool introduces a revolutionary new power tool that makes detail sanding faster, easier, and cleaner. The new linear sander is designed for professional use with the quality and reliability you expect from Festool.

- Outstanding results and economic labor saver on rebates and profiles with a working stroke of 5/32" (4 mm)
   and a sanding surface of 3" x 5"
- The variety of sanding bases and abrasive materials for specific applications ensures a wide range of uses
- Straight linear motion with no impacts against sides of rebates
- Faster than manual sanding - up to three times faster
- Cleaner than manual sanding, with dust extraction port
- Quick, easy and toolless sanding base change using the ingenious FastFix system
- Plug it detachable power cord

Click here for manual

 6" random orbit sander ETS 150/3 EQ with 3 mm (1/8") sanding stroke
Item # 571540 
 

The right tool for the job. The ETS 150/3 has a short 1/8" stroke for fine finish work. The ETS 150/5 has a 3/16" stroke for intermediate sanding and fast stock removal. Both versions are balanced for their specific stroke, for smooth, low-vibration working.

- Optimum dust extraction through patented Jetstream principle (air flowing out through an additional hole in
   the center of the sanding pad)
- Turbo dust extraction
- Sanding pad brake prevents scratches when placed on or removed from the workpiece
- Stepless electronic control for various uses
- StickFix (H&L) system for fast abrasives changing
- Encapsulated bearing for long service life
- Very smooth running through VS balancing
- Dust extraction port
- Plug it detachable power cord

Click here for manual

6" random orbit sander ETS 150/5 EQ with 5 mm (3/16") sanding stroke
Item # 571541 
 

The right tool for the job. The ETS 150/3 has a short 1/8" stroke for fine finish work. The ETS 150/5 has a 3/16" stroke for intermediate sanding and fast stock removal. Both versions are balanced for their specific stroke, for smooth, low-vibration working.

- Optimum dust extraction through patented Jetstream principle (air flowing out through an additional hole in
   the center of the sanding pad)
- Turbo dust extraction
- Sanding pad brake prevents scratches when placed on or removed from the workpiece
- Stepless electronic control for various uses
- StickFix (H&L) system for fast abrasives changing
- Encapsulated bearing for long service life
- Very smooth running through VS balancing
- Dust extraction port
- Plug it detachable power cord

Click here for manual

5" random orbit sander ETS 125 EQ
Item # 571610