 |

 |
T 12 + 3 DRILL
Driving System 10.8 Volts Lithium Drill driver Set
Item # 564247
|
Includes :
T12 Drill •Charger (495227)
(2) Batteries (495479)
Centrotec starter set (492772)
Fastfix Right-angle Chuck (490293)
Fastfix Eccentric Chuck (490294)
Fastfix Keyless Chuck (490698)
Systainer
Plus Addition Systainer with Drill Bit Compartment on
Top |
Our cordless drills look different, because they are
different. Crafted to the highest level of German
engineering, Festool cordless drills offer a level of
quality not found in other cordless drills. From the
EC-TEC brushless motors, to the interchangable Centrotec
and FastFix chucks, these cordless drills were designed
to work the way you work.
The Festool T+3 offers greater torque than competing
drills, even those with greater voltage.
-Voltage: 10.8
-Weight: 3 lb 1.4 oz
-Speed (low): 0 - 450 rpm
-Speed (high): 0 - 1,500 rpm
-Chuck cap.: 1/2"
-Max Drill - steel: 9/16" (14 mm)
-Max Drill - wood: 1" (25.4 mm) Max torque - steel:
265.5 in lb
-Charging time (LI): 70 minutes
__________________________________________________________________________________________
|
 |
Lithium Ion Cordless
T 15 + 3 DRILL Driving System 14.4 Volts
Item # 564250
|
Includes :
T 15+3 Li-Ion Drill Driver - 564250
TRC 3 Charger
(2) 14.4 Volt Lithium Ion Batteries
FastFix Right Angle Chuck - 490293
FastFix Eccentric Chuck - 490294
Centrotec Starter Set - 492772
Systainer 2 Case - 445434 •
SYS 1 Box Systainer w/ Removable Compartments - 487552
(FREE) |
Festool cordless drills look different, because they are
different. Crafted to the highest level of German
engineering, Festool cordless drills offer a level of
quality not found in other cordless drills. From the
EC-TEC brushless motors, to the interchangable Centrotec
and FastFix chucks, these cordless drills were designed
to work the way you work.
The Festool T+3 offers greater torque than competing
drills, even those with greater voltage.
-The well-balanced, lightweight, ergonomic design of the
T+3 cordless drill reduces fatigue
-With the flexibility offered by the FastFix chuck
system, you have a solution for nearly every challenge
-The included right angle chuck, offers flexibility in
cramped spaces
-The included eccentric chuck, allows you to work easily
in corners and against perpendicular surfaces
-The included Centrotec chuck is compact is up to 80%
lighter than standard drill chucks which provides better
ergonomics
-The T+3 utilizes a brushless motor which reduces wear
and greatly increases efficiency compared to other
drills
-The intelligent TRC 3
microprocessor-controlled charger and battaries protects
the entire power system and prolongs its life Festool by
a 3 year warranty
__________________________________________________________________________________________
|
 |
C 12 cordless
drill, NiCd 1.3 Ah batteries
Item # 564178
|
Includes :
2
NiCad 1.3 Ah battery packs (493348)
LC 45 charger (492138)
Centrotec chuck (492135) with starter set including 4mm wood drill,
Phillips 2 bit and Centrotec bit holder/adapter
FastFix (quick connect) straight chuck (490698)
In Systainer 1 (445433) |
The very compact, remarkably light C12 offers all the power, control,
torque, and features you need for demanding jobs. It's the lightest 12v
on the market and the first cordless drill with a brushless motor. Lift
a pound less each time you drill or drive without sacrificing any
power. That's 200 fewer pounds in a typical day. As for longevity, the
C12 will drive up to one million screws before it needs to be replaced.
- High power batteries with smart charger for long service life
- New motor design allows short drill head for compactness
- EC-TEC motor without carbon brushes produces virtually no mechanical
wear
- Stepless electronic speed control for work in any material
- Softgrip for comfort on long jobs
- Good center of gravity for long jobs
- On-board magnetic bit holder
- Takes Centrotec and FastFix chucks
- The spring contacts are cleaned automatically every time the battery
pack is slotted into position
Click here for manual
__________________________________________________________________________________________
|
 |
C 12 cordless
drill, NiCd 2.4 Ah batteries
Item # 564179
|
Includes :
2 NiCad 2.4 Ah
battery packs (492268)
LC 45 charger (492138)
Centrotec chuck (492135) with starter set including 4mm wood drill,
Phillips 2 bit and Centrotec bit holder/adapter
FastFix (quick connect) straight chuck (490698)
In Systainer 1 (445433)
|
The very compact, remarkably
light C12 offers all the power, control, torque, and features you need
for demanding jobs. It's the lightest 12v on the market and the first
cordless drill with a brushless motor. Lift a pound less each time you
drill or drive without sacrificing any power. That's 200 fewer pounds
in a typical day. As for longevity, the C12 will drive up to one
million screws before it needs to be replaced.
- High power batteries with smart charger for long service life
- New motor design allows short drill head for compactness
- EC-TEC motor without carbon brushes produces virtually no mechanical
wear
- Stepless electronic speed control for work in any material
- Softgrip for comfort on long jobs
- Good center of gravity for long jobs
- On-board magnetic bit holder
- Takes Centrotec and FastFix chucks
- The spring contacts are cleaned automatically every time the battery
pack is slotted into position
Click here for manual
____________________________________________________________________________________
|
 |
C 12 cordless drill, NiMh 3.0 Ah batteries
Item # 564180
|
Includes :
2 NiMH 3.0 Ah battery packs (491821)
LC 45 charger (492138)
Centrotec chuck (492135) with starter set including 4mm wood drill, Phillips 2 bit and Centrotec bit holder/adapter
FastFix (quick connect) straight chuck (490698)
In Systainer 1 (445433)
|
The very compact, remarkably light C12 offers all the power, control, torque, and features you need for demanding jobs. It's the lightest 12v on the market and the first cordless drill with a brushless motor. Lift a pound less each time you drill or drive without sacrificing any power. That's 200 fewer pounds in a typical day. As for longevity, the C12 will drive up to one million screws before it needs to be replaced.
- High power batteries with smart charger for long service life
- New motor design allows short drill head for compactness
- EC-TEC motor without carbon brushes produces virtually no mechanical wear
- Stepless electronic speed control for work in any material
- Softgrip for comfort on long jobs
- Good center of gravity for long jobs
- On-board magnetic bit holder
- Takes Centrotec and FastFix chucks
- The spring contacts are cleaned automatically every time the battery pack is slotted into position
Click here for manual
____________________________________________________________________________________
|
 |
FastFix
cordless drill TDK 15.6
Item # 564139
|
Includes :
2 NiCad 2.4 Ah battery packs (492269)
LC 45 charger (492138)
Centrotec chuck (492135) with starter set including 4mm wood drill,
Phillips 2 HiQ bit and Centrotec bit holder/adapter
FastFix (quick connect) straight adjustable chuck (490698)
In Systainer 1 (445433) |
The very compact, remarkably
light TDK offers all the power, control, torque, and features you need
for demanding jobs.
- High power batteries with smart charger for long service life
- Sintered planetary gears
- New motor design allows short drill head for compactness
- Stepless electronic speed control for work in any material
- Wraparound softgrip for comfort on long jobs
- Good center of gravity for long jobs
- On-board magnetic bit holder
- Takes Centrotec and FastFix chucks
- The spring contacts are cleaned automatically every time the battery
pack is slotted into position
Click here for manual
____________________________________________________________________________________
|
 |
FastFix
cordless drill TDK 15.6 set
Item # PTDK15S
|
Includes :
2 NiCad 2.4 Ah battery packs (492269)
LC 45 charger (492138)
Centrotec chuck (492135) with starter set including 4mm wood drill,
Phillips 2 HiQ bit and Centrotec bit holder/adapter
FastFix (quick connect) straight adjustable chuck (490698)
FastFix (quick connect) right angle (490293) and eccentric (490294)
chucks
In Systainer 1 (445433) |
The very compact, remarkably
light TDK offers all the power, control, torque, and features you need
for demanding jobs.
- High power batteries with smart charger for long service life
- Sintered planetary gears
- New motor design allows short drill head for compactness
- Stepless electronic speed control for work in any material
- Wraparound softgrip for comfort on long jobs
- Good center of gravity for long jobs
- On-board magnetic bit holder
- Takes Centrotec and FastFix chucks
- The spring contacts are cleaned automatically every time the battery
pack is slotted into position
Click here for manual
____________________________________________________________________________________
|
 |
FastFix
cordless drill TDK 12.
Item # 564136
|
Includes :
2 NiCad 2.4 Ah battery packs (492268)
LC 45 charger (492138)
Centrotec chuck (492135) with starter set including 4mm wood drill,
Phillips 2 HiQ bit and Centrotec bit holder/adapter
FastFix (quick connect) straight adjustable chuck (490698)
In Systainer 1 (445433) |
The very compact, remarkably
light TDK offers all the power, control, torque, and features you need
for demanding jobs.
- High power batteries with smart charger for long service life
- Sintered planetary gears
- New motor design allows short drill head for compactness
- Stepless electronic speed control for work in any material
- Wraparound softgrip for comfort on long jobs
- Good center of gravity for long jobs
- On-board magnetic bit holder
- Takes Centrotec and FastFix chucks
- The spring contacts are cleaned automatically every time the battery
pack is slotted into position
Click here for manual
____________________________________________________________________________________
|
 |
FastFix cordless
drill TDK 12 Set.
Item # 564163
|
Includes :
2 NiCad 2.4 Ah battery packs (492268)
LC 45 charger (492138)
Centrotec chuck (492135) with starter set including 4mm wood drill,
Phillips 2 HiQ bit and Centrotec bit holder/adapter
FastFix (quick connect) straight adjustable chuck (490698)
FastFix (quick connect) right angle (490293) and eccentric (490294)
chucks
In Systainer 1 (445433) |
The very compact, remarkably light TDK offers all the power, control,
torque, and features you need for demanding jobs.
- High power batteries with smart charger for long service life
- Sintered planetary gears
- New motor design allows short drill head for compactness
- Stepless electronic speed control for work in any material
- Wraparound softgrip for comfort on long jobs
- Good center of gravity for long jobs
- On-board magnetic bit holder
- Takes Centrotec and FastFix chucks
- The spring contacts are cleaned automatically every time the battery
pack is slotted into position
Click here for manual
____________________________________________________________________________________
|
|
|
 |