|
General Finishes Water Based
Water Base Stains, Paints, and Topcoats
|
Exterior 450
GF Water Based Wood Stains
GF PolyAcrylic Blend Top Coat
GF Sanding Sealer
Are you looking for furniture or cabinet finishes?
Environment friendly PolyAcrylic finishes are easy to apply,
durable, and simple to repair. Our special waterborne
formulas deliver extraordinary depth and vibrancy of color
that cannot be achieved in any oil based product. If you are
looking for color - use General Finishes Water Based
products! Whether you want bold and luscious or traditional
and classic, General Finishes has the finish for you.
Available by the pint, quart or gallon. For a local dealer
near you, visit General Finishes retail store locator for
fine wood finishes. |
 |
Exterior 450
Designed for exterior wood applications, EXTERIOR 450
varnish provides your wood with a tough, protective finish
that will withstand the rigors of the sun, rain, and wind.
Ideal for outdoor furniture, doors, and case goods, EXTERIOR
450 is fortified with UV absorbers to help minimize fading
and maximize performance. Its built-in mildewcide retards
mold and mildew growth.
Exterior 450 is tough and flexible, and will resist the
expansion and contraction of the wood through hot summers
and cold winters that typically causes cracking and peeling.
Available in Satin and Semi-Gloss, it flows well and dries
rapidly to a clear finish.
|
 |
GF Water Based Wood Stains
Our Water Based Stains have all the advantages of oil base
stains: they spread easily, can be repaired, can be blended
effortlessly, and have plenty of open time. The thicker
formula allows controlled penetration, which will reduce
blotching on softer woods such as Aspen, Pine and Maple.
Water based Wood Stains are available in the following
colors: Whitewash, Natural (clear finish), Country Pine,
Golden Oak, Antique Oak, Pecan, Shaker Maple, Early
American, Antique Cherry, Black Cherry, Rosewood, Cranberry
Red, Walnut, Brown Mahogany, Espresso and Black. The
digitized colors shown are for reference purposes only.
Always test stain on a hidden area of the wood to verify
desired color.
|
| |
|
| |
|
| |
|
|
GF PolyAcrylic Blend Top Coat
This crystal clear finish is rated by Fine Woodworking
magazine as "Best Brush-on" in a competition of national
brands. It is our standard "work horse" top coat and can be
used in furniture and woodwork. Formulated to be durable and
consumer friendly, it flows and levels easily and has great
adhesion characteristics. It has strong sag resistance for
vertical surfaces and its higher polyurethane content
provides greater durability than other polyurethane/acrylic
blends. Once you use PolyAcrylic Blend you will say to
yourself, "Fine Woodworking was right on!" Available in the
following sheens, Matte, Satin, Semi-Gloss, and Gloss.
|
 |
GF Sanding Sealer
Sanding Sealer is a water base acrylic basecoat. It provides
initial sealing for all GF water base topcoats. It can be
used over raw wood or a stained surface. Sanding Sealer has
been sterated so it will sand easier. Sanding Sealer is not
as durable as the topcoats so it is not recommended for a
final finish.
Drying Time: 1-2 hours under normal conditions.
(70°F -70% humidity)
|
|
