 |
 |
FC18 - 18" Face Clamp 10" |
|
Our line of Face Clamps helps to ensure a perfectly flush joint every time.
Without clamping, the joint can misalign if the screw follows the grain of the
wood. To use, place the large pad of the clamp directly over the center of the
joint line on the face side of the workpiece(opposite the pocket holes), clamp
with moderate pressure and drive a screw. Four sizes are available; SFC - 2" reach, PFC
- 3-1/4" reach. LFC - 6" reach and FC18 -10" reach.
____________________________________________________________________________________
|
 |
Right Angle Clamp
Model RAC |
|
Our Right Angle Clamp helps to align workpieces in 90 degree registration. The
clamp is designed with a 3/8" steel pin on one arm that fits down into the
pocket hole and anchors the workpiece firmly against the second workpiece to be
joined. The opposite arm is fitted with a 180 swiveling pad that automatically
adjusts to your material dimensions. Finish the joint by driving a screw into
the adjacent pocket hole. Also great for assembling all types of box joints.
____________________________________________________________________________________
|
 |
Standard Face Clamp 2" Reach
Model SFC |
|
Our line of Face Clamps helps to ensure a perfectly flush joint every time.
Without clamping, the joint can misalign if the screw follows the grain of the
wood. To use, place the large pad of the clamp directly over the center of the
joint line on the face side of the workpiece(opposite the pocket holes), clamp
with moderate pressure and drive a screw. Four sizes are available; SFC - 2"
reach, PFC - 3-1/4" reach, LFC - 6" reach and FC18 -10" reach.
____________________________________________________________________________________
|
|
|
|
